Toyota SPA34 Bedienerhandbuch PDF herunterladen (Seite 27)

• Changing the needle

Caution

Before changing the needle, remove the power plug

from the outlet.

Not doing so could cause an injury.

Be sure to dispose of broken needle in a safe manner.

Not doing so could cause an injury.

Turn the handwheel towards yourself

to raise the point of the needle higher

than the needle plate.

Hold the needle in one hand, loosen

the needle clamp screw with the screw

driver for the needle plate, and remove

the needle.

Note: Do not remove the needle

clamp screw. Loosen the

needle clamp screw to

remove the needle.

Correct needle selection

Good needle

Faulty needle

The entire needle is bent

The point of the needle

is blunt / worn away

The point of the needle

is bent

If a faulty needle is used, not only could it impair the sewing

performance, but it could also damage the needle plate or

hook, or break the needle.

∗

Incorrect stitching or thread breaking, try replacing the

needle.

Screw driver for the needle plate

Needle clamp

screw

Face the ﬂ at surface of the needle

to the rear and insert until it makes

contact with the pin.

Firmly tighten the needle clamp

screw with the screw driver for the

needle plate.

Flat surface

Sewing preparations

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare

Toyota SPA34 Bedienerhandbuch Seite 27

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nähmaschinen Toyota SPA34